High Reach Forklifts for Western Australian Warehouses: A Practical Guide
Industrial land around Perth is not getting any cheaper. A distribution business that has outgrown its shed in Malaga or Jandakot usually faces two choices: move to a bigger site, or make far better use of the cubic metres it already pays for. For many operators, the second option starts with a reach truck.
Reach trucks, often called high-reach forklifts, are built to stack pallets high in tight aisles where a standard counterbalance simply cannot turn. This guide explains how they work, the difference between sit-down and stand-up models, and what to check before you bring one into your warehouse.
At a glance
- Reach trucks operate in aisles roughly 2800 to 3400 mm wide and can lift loads up to 13 metres.
- Sit-down models suit long stints in the seat; stand-up models suit operators who hop on and off all shift.
- The payoff is more pallet positions in the same building, not just faster lifting.
- Racking, floor condition and operator training need to be planned alongside the truck.
How a reach truck differs from a counterbalance
A conventional counterbalance forklift carries its load out in front and relies on a heavy rear counterweight to stay stable. That design needs plenty of room to turn, so aisles between racking end up wide.
A reach truck works differently. The load sits within the truck’s wheelbase while travelling, and the forks extend forward only when it is time to place or retrieve a pallet. That lets the machine work in much narrower aisles, typically between 2800 mm and 3400 mm, while lifting loads up to 13 metres, depending on the model and mast.
There are two ways the forks reach out. In a moving-mast design, the entire mast travels forward on rails. On a pantograph design, a scissor mechanism pushes the forks out from a fixed mast.
Where they earn their keep
Reach trucks are at home anywhere floor space is tight and stock is palletised. In WA that includes:
- Third-party logistics and freight warehouses in Kewdale, Welshpool and Perth Airport precincts, where high pallet density keeps storage costs down.
- Cold storage for WA produce, meat and seafood, where every chilled cubic metre is expensive to run.
- Manufacturing and wholesale sites in Canning Vale, Malaga and Bibra Lake are storing raw materials and finished goods.
- Retail and e-commerce distribution, especially through peak seasons when volume climbs fast.
Sit-down or stand-up: matching the truck to the work
The right configuration depends mostly on how your operators spend their shift.
| Sit-down reach truck | Stand-up reach truck | |
|---|---|---|
| Operator position | Seated, with steering wheel, pedals and levers | Standing on a platform, using hand controls |
| Best suited to | Long periods of continuous driving and putaway | Frequent getting on and off to check stock or do paperwork |
| Comfort over a long shift | Higher | Lower for extended driving |
| Hyundai range | 14, 16, 20, 25BRJ-9 | 15, 18, 20, 25BR-X and 15, 18, 20, 23BRP-9 |
Many warehouses end up with both. A seated truck handles bulk putaway and replenishment, while a stand-up truck works the pick faces and receiving dock where the operator is constantly stepping off.
Why businesses choose reach trucks
- More storage in the same building. Narrower aisles and taller racking add pallet positions without adding floor area, which can delay or avoid a costly move.
- Quicker high-level handling. Reach trucks are designed for repeated lifts to upper racking, so operators move more pallets per hour in a racked store.
- Careful load handling. Good visibility up the mast and precise controls help operators place loads accurately at height, reducing the risk of product damage and injury.
- Flexibility with attachments. Options such as sideshifters let operators line up pallets without repositioning the whole truck, which helps with mixed load types.
Planning the warehouse around the truck
A reach truck is only as good as the building it works in. Before committing, work through these with your racking supplier and equipment dealer:
- Aisle width. Confirm the working aisle the specific model needs with your pallet size, and allow for any columns, sprinklers or doorways.
- Lift height and capacity. Capacity reduces as lift height increases, so check the load chart at your top beam level, not just at ground level.
- Floor condition. High lifts magnify any slope or unevenness in the slab. Older sheds with cracked or uneven floors may need work before a tall mast is safe to use.
- Charging. Reach trucks are electric, so plan where and when to charge batteries, especially in multi-shift operations.
- Racking compliance. Taller racking needs proper design, load signage and regular inspection.
Our forklift buying guide covers more of the questions worth answering before you get a quote.
What this means for Perth and WA sites
For many Perth warehouses, the cost of more floor space outweighs the cost of better equipment, which makes reach trucks a practical way to grow without relocating. Summer heat in uninsulated sheds and the constant temperature swings of cold stores also make battery care and servicing important, so build a regular service plan into the budget from day one.
Working at height in racked aisles brings its own set of risks, including falling objects, pedestrian separation, and operator competency, and WA’s WHS laws expect businesses to address each of them. Operators also need the appropriate high-risk work licence; check the requirements with WorkSafe WA. If you would like to trial a reach truck before buying, HMH WA’s Bassendean team offers forklift hire as well as sales, servicing and genuine parts. Contact us to talk through your layout.
Related Hyundai equipment
Hyundai BRJ-9 sit-down
Reach truck · View range
Hyundai BRP-9 stand-up
Reach truck · View range
Warehouse equipment hire
Short and long term · View hire
Hyundai 25B-X
2.5 tonne lithium · View model
Frequently asked questions
How high can a reach truck lift?
Depending on the model and mast, reach trucks can lift loads up to about 13 metres. Capacity falls as height increases, so always check the load chart at your highest racking level.
How wide does an aisle need to be for a reach truck?
Reach trucks typically work in aisles of around 2800 to 3400 mm. The exact figure depends on the model, pallet size and load, so confirm it with your dealer before designing racking.
Should I choose a sit-down or stand-up reach truck?
Choose sit-down if operators spend long periods driving and putting away stock. Choose stand-up if they regularly get off the truck to check stock, scan or handle paperwork.
Talk to our Team
Sales, Hire, Servicing and Genuine Parts from Hyundai Material Handling WA.
Latest Posts
Recent Posts
Why Buy From Hyundai Material Handling WA
Buying a forklift is a long-term decision. With a local Hyundai dealer, you get sales, service, parts and hire from one Perth-based team.
Perth Based Team
Talk to people who know Western Australian sites, from our base in Bassendean.
Servicing and Repairs
Scheduled servicing and repairs by Hyundai-trained technicians.
Genuine Hyundai Parts
Genuine parts sourced through our Perth parts team.
Buy or Hire
Purchase outright or ask about short and long term hire options.
Get a Brochure and a Quote
Download a brochure, or tell us about your loads, lift heights and site and we will recommend the right Hyundai forklift. We supply businesses across Perth and regional Western Australia.
Fill out the form below, and we will contact you as soon as possible.
Contact or call us directly on (08) 9377 3321
Customer Reviews
Hundreds of Western Australian Businesses Trust Hyundai Material Handling.
See our 5-star reviews and long-standing client partnerships.
Our clients choose us for reliability, honesty, and expert forklift support.
Ready to Talk Forklifts?
Speak with our Perth team about pricing, availability, hire and finance.