Forklifts Below Deck: How Ships Are Unloaded at Western Australian Ports
Stand on the wharf at Fremantle or Bunbury while a geared bulk carrier is being worked and you may see something that looks slightly unreal. The ship’s own crane swings out over the quay, picks up a forklift by its lifting points, and lowers the whole machine down through the hatch into the hold. A few minutes later, packs of steel or timber start coming back up on the hook.
For stevedores, this is ordinary work. For anyone who manages heavy equipment around WA’s ports, it is a useful reminder that a forklift working inside a ship faces conditions quite unlike a yard in Kewdale or Welshpool. Here is why forklifts go below deck, what the hold demands of them, and how to approach the equipment decision.
At a glance
- Container ships are unloaded by gantry cranes, but breakbulk cargo in a ship’s hold often requires a forklift to work inside.
- Low headroom, steel floors, limited ventilation, and tight vessel schedules all shape the choice of machine.
- Heavy diesel forklifts in the 10 tonne class are a common fit, and sealed wet disc brakes help in dirty, damp holds.
- Reliable service and parts backup matter as much as capacity when a ship is waiting.
Containers versus breakbulk
A container vessel never needs a forklift on board. Each box is lifted straight from the deck or cell by a gantry crane and set down on the quay. Breakbulk is a different story. Steel coils and beams, packs of sawn timber, bagged products, machinery and project cargo are stowed in the holds as individual units rather than in boxes.
The ship’s crane can only pick up what is sitting directly under the open hatch. Cargo packed out towards the sides and ends of the hold is out of its reach. Someone has to bring those loads into the open square beneath the hatch, and that job falls to a forklift that has been lifted aboard and set down inside.
A relay between hold, crane and quay
Once the forklift is in the hold, unloading becomes a rhythm. The forklift carries each unit from the wings to the hatch square, the crane lifts it out and lands it on the wharf, and a second forklift on the quay moves it away to a storage area or onto a truck so the landing spot is clear for the next lift. The cycle repeats until the hold is empty, then the forklift is craned out again.
Vessels set up for this are geared bulk carriers, which carry their own deck cranes, allowing them to work at berths without shore cranes. They are a regular sight at regional and bulk ports, where breakbulk and project cargo for construction, mining and energy projects come across the wharf.
Four things the hold demands
A ship’s hold quickly rules out machines that work perfectly well on an open wharf. Four conditions set the specification.
| Condition in the hold | What it affects |
|---|---|
| Low clearance under the deck | Mast choice and overall lowered height |
| Steel plate floor, uneven and often slippery | Tyres, grip and stability |
| Partly enclosed space | Exhaust management and ventilation |
| Vessel waiting at the berth | Reliability and service response |
- Clearance. Space shrinks under the hatch coaming and between decks. Mast height and the truck’s lowered height need to be checked against the actual hold, because a forklift that cannot get under the deckhead cannot reach the cargo stowed in the wings.
- The floor. Steel plate is rarely flat, may be covered in dunnage, and can be greasy or wet from condensation and cargo residue. Tyres, traction and stability all work harder than on a concrete slab, much like operating in heavy winter rain but in a confined space.
- Air quality. Because the hold is only partly open to the air, exhaust and airflow need to be covered in the stevedoring plan. This influences work patterns and power choices rather than automatically ruling machines in or out.
- Time pressure. Every hour a ship spends alongside costs money. A forklift breaking down below deck does not just halt itself. It supports the crane, the wharf crew, and the vessel.
Choosing the right machine for hold work
Breakbulk terminals use a wide range of forklift capacities, from small machines of around one tonne up to heavy units of 45 tonnes. Work inside the hold usually falls in the heavy middle band. Dense cargo, continuous cycles and the need for strong torque point towards diesel, and 10-tonne class trucks such as the Hyundai 100D-9 suit steel products and heavier breakbulk.
Braking is another detail that matters more below deck than almost anywhere else. Debris, dust and moisture constantly reach the axles, which is why sealed wet disc brakes, fitted as standard on Hyundai diesel forklifts, are a strong fit for this work.
Power choice can also follow the vessel. On refrigerated ships, palletised chilled cargo below deck is often moved by electric forklifts, as zero exhaust emissions suit both the enclosed space and the food being handled.
Let the toughest job set the specification
The same forklift model can be built with different masts, tyres and protective options depending on where it will spend its time. Three principles help when equipping a port operation:
- Plan around the hold. A port forklift may spend most of its hours on open ground, but the hold has the tightest limits. A fleet chosen only for the wharf can be caught short when a geared ship arrives with cargo tucked into the wings.
- Treat reliability as part of capacity. When a vessel and crew are waiting, uptime is throughput. The cost of one idle machine in a hold can easily outweigh any savings made on the purchase price.
- Organise support before the ship berths. Service coverage, spare parts and a dealer who understands vessel schedules should be settled as part of the equipment decision, not after a breakdown.
What this means for Perth and WA sites
Western Australia moves a lot of cargo by sea, and much of it is not in containers. Steel, timber, machinery and project freight for mining and resources work cross the wharves at Fremantle, Kwinana, Bunbury, Geraldton and the Pilbara ports. Coastal conditions add salt air and winter rain, and regional ports are a long drive from Perth, so a stevedore or logistics operator cannot afford to wait days for a technician or a part.
HMH WA’s team supports heavy diesel forklifts across the state with sales, scheduled servicing and repairs and genuine parts. If you need extra capacity for a vessel or project, short-term forklift hire can cover peak periods, and our wide range of forklifts includes heavy diesel models from 7 tonnes upwards.
Related Hyundai forklifts
Hyundai 100D-9
10 tonne diesel · View model
Hyundai 160D-7E
16 tonne diesel · View model
Hyundai 250D-9
25 tonne diesel · View model
Hyundai 70D-9
7 tonne diesel · View model
Frequently asked questions
How does a forklift get into a ship's hold?
The vessel’s own crane lifts it aboard using the forklift’s certified lifting points and lowers it through the open hatch. When the hold has been worked, it is lifted back out to the wharf the same way.
Why can't the ship's crane unload everything by itself?
The crane can only reach cargo sitting directly below the hatch opening. Units stowed towards the sides and ends of the hold have to be moved into that area first, and a forklift working inside the hold does that job.
What type of forklift is used inside a ship's hold?
Usually a heavy diesel forklift, often in the 10 tonne class, configured for the hold with a suitable mast height, tyres for steel floors and enough torque for continuous dense loads. Electric forklifts are common on refrigerated vessels carrying palletised cargo.
Talk to our Team
Sales, Hire, Servicing and Genuine Parts from Hyundai Material Handling WA.
Latest Posts
Recent Posts
Why Buy From Hyundai Material Handling WA
Buying a forklift is a long-term decision. With a local Hyundai dealer, you get sales, service, parts and hire from one Perth-based team.
Perth Based Team
Talk to people who know Western Australian sites, from our base in Bassendean.
Servicing and Repairs
Scheduled servicing and repairs by Hyundai-trained technicians.
Genuine Hyundai Parts
Genuine parts sourced through our Perth parts team.
Buy or Hire
Purchase outright or ask about short and long term hire options.
Get a Brochure and a Quote
Download a brochure, or tell us about your loads, lift heights and site and we will recommend the right Hyundai forklift. We supply businesses across Perth and regional Western Australia.
Fill out the form below, and we will contact you as soon as possible.
Contact or call us directly on (08) 9377 3321
Customer Reviews
Hundreds of Western Australian Businesses Trust Hyundai Material Handling.
See our 5-star reviews and long-standing client partnerships.
Our clients choose us for reliability, honesty, and expert forklift support.
Ready to Talk Forklifts?
Speak with our Perth team about pricing, availability, hire and finance.