Electric Pallet Jacks in Western Australia: Walkie or Rider, Lithium or Lead Acid
Watch the back dock of a Malaga hardware wholesaler at the end of a hot February shift. A storeperson has spent the day hauling loaded pallets off the truck with a hand jack, up the short concrete ramp and across to staging, perhaps a few dozen times. By three o’clock, the pallets feel twice as heavy as they did at seven in the morning, and the ramp has become the part of the job everyone tries to avoid.
That is usually the moment a business starts looking at an electric pallet jack. They are one of the simplest pieces of powered equipment you can buy, but there are still choices to make: walk behind or ride on, lithium or lead acid, and what fork length suits the pallets you actually handle. Here is a practical way through them.
At a glance
- Walkie jacks suit shorter, moderate runs. Rider jacks suit long, repetitive routes and multi-shift work.
- Lots of moves, long distances or ramps are the signs a manual jack has reached its limit.
- Voltage (such as 24V) tells you the electrical class, not whether the battery is lithium or lead acid.
- Check fork length against the 1165 x 1165 mm Australian pallet before you buy.
Manual or electric: how to tell it is time
An electric pallet jack does the same job as a hand jack, moving pallets at floor level, but a motor handles the driving and lifting instead of the operator’s legs and back. Whether you need one depends on the workload, so start by counting.
- Number of moves. A handful of pallets a day is fine by hand. Dozens per shift is a different story.
- Distance. Pushing a loaded pallet from the roller door to the far end of a long warehouse takes real effort, and it adds up.
- Ramps and slopes. Dock ramps and uneven yards are where manual jacks become a genuine strain and injury risk, both pushing a load up and holding it back on the way down.
- Fatigue. If staff finish the day worn out from pallet work, productivity has already dropped and the injury risk has increased.
When two or more of these apply, a powered drive lets the same team move more pallets with less effort, which is the real return on the purchase.
Walkie or rider?
Electric pallet jacks come in two main styles. With a walkie, the operator walks behind the truck and steers it using a tiller arm. With a rider, the operator stands on a platform built into the truck and travels with it.
| Walkie | Rider | |
|---|---|---|
| Operator | Walks behind, steers by tiller | Stands on a built-in platform |
| Typical job | Dock to staging, short internal moves | Long routes, high volume, repeated runs |
| Hyundai models | 12EP-XB, 15EP-XB, 20EP-XB, 16EP-X, 20EP-X, 25EP-X | 20EPR-X, 25EPR-X |
| Capacity | 1.2 to 2.5 tonnes | 2.0 to 2.5 tonnes |
Hyundai’s walkie line-up starts with the 12EP-XB at 1.2 tonnes and the 15EP-XB at 1.5 tonnes, with the 20EP-XB at 2.0 tonnes for standard duty. For heavier loads, the EP-X walkies go up to 2.5 tonnes in the 25EP-X, with 16EP-X and 20EP-X versions below it. The 20EPR-X and 25EPR-X riders are designed for multi-shift use and can travel at up to 8 km/h, which makes a noticeable difference on a long cross-dock route.
Lithium or lead acid?
Both battery types are available, and the right one depends on how many hours the jack works each day.
Lithium options in the Hyundai range
- 12EP-XB and 15EP-XB: 24V/20Ah as standard, with a 24V/36Ah pack available for longer shifts.
- 20EP-XB: a 48V lithium system to suit its 2.0 tonne rating.
- 20EPR-X and 25EPR-X: lithium offered as an upgrade for multi-shift sites.
- 15LPT: a plug-and-play lithium pack weighing under 13 kg, which can be swapped and charged from an ordinary power point.
Lead acid options
- 20EPR-X and 25EPR-X: 24V packs from 160Ah to 350Ah as standard.
- 15EPT: a maintenance-free lead acid pack.
One common point of confusion: a 24V truck can run on either chemistry. The voltage describes the electrical system, not what is inside the battery box. The practical difference is in charging. Lithium can be topped up quickly during smoko and lunch, making it well-suited to long days and multiple shifts. Lead acid needs a full charge cycle and is best for single-shift operations where the jack can sit on charge overnight.
Sizing for Australian pallets
Capacity is the obvious number to check, and it should cover your heaviest regular load with some margin. Fork length is the one that catches people out. The standard Australian pallet is 1165 x 1165 mm, while many pallet jacks are designed around the international 1200 x 1000 mm pallet. A jack built for international sizes may not properly support an Australian pallet at its ends, compromising stability and potentially damaging pallets and stock.
Before you order, measure the pallets you handle most, including any export or imported pallets that come through your dock, and match the fork length to them.
What this means for Perth and WA sites
Electric pallet jacks suit a huge range of WA businesses: freight depots in Kewdale and Perth Airport, retail and hardware backrooms, beverage and grocery distributors, and regional stores in Bunbury, Geraldton and Kalgoorlie that unload a few trucks a week. Summer heat makes manual pallet work even harder, and long, hot days are exactly when fatigue-related injuries tend to occur.
WorkSafe WA expects businesses to manage hazardous manual tasks under the Work Health and Safety (General) Regulations 2022, and repeated pushing and pulling of loaded pallets is a classic example. HMH WA’s team in Bassendean can help you choose the right jack, set up battery charging and keep it running with genuine parts and servicing. If you want to try before buying, short or long term hire is an easy way to test a walkie or rider on your own dock. You can also browse our warehouse equipment.
Related Hyundai equipment
Pallet jacks and stackers
Warehouse equipment · View range
Hyundai reach trucks
Warehouse equipment · View range
Hyundai 25B-X
2.5 tonne lithium · View model
Frequently asked questions
How long will an electric pallet jack battery last?
It depends on the battery and how hard the jack works. Lithium packs can be topped up during breaks, so they suit long days and multi-shift work. Lead acid packs are best for a single shift followed by a full overnight charge. Match the battery to your actual operating hours.
What is the difference between a walkie and a rider pallet jack?
On a walkie, the operator walks behind and steers with a tiller, which suits shorter runs. On a rider, the operator stands on a platform and travels with the truck, which suits longer, high-volume routes. Hyundai’s 20EPR-X and 25EPR-X riders reach up to 8 km/h.
What fork length do I need for Australian pallets?
Choose forks that properly support the 1165 x 1165 mm Australian standard pallet if that is what you handle. Jacks built around the 1200 x 1000 mm international pallet can leave Australian pallets unsupported at the ends.
Talk to our Team
Sales, Hire, Servicing and Genuine Parts from Hyundai Material Handling WA.
Latest Posts
Recent Posts
Why Buy From Hyundai Material Handling WA
Buying a forklift is a long-term decision. With a local Hyundai dealer, you get sales, service, parts and hire from one Perth-based team.
Perth Based Team
Talk to people who know Western Australian sites, from our base in Bassendean.
Servicing and Repairs
Scheduled servicing and repairs by Hyundai-trained technicians.
Genuine Hyundai Parts
Genuine parts sourced through our Perth parts team.
Buy or Hire
Purchase outright or ask about short and long term hire options.
Get a Brochure and a Quote
Download a brochure, or tell us about your loads, lift heights and site and we will recommend the right Hyundai forklift. We supply businesses across Perth and regional Western Australia.
Fill out the form below, and we will contact you as soon as possible.
Contact or call us directly on (08) 9377 3321
Customer Reviews
Hundreds of Western Australian Businesses Trust Hyundai Material Handling.
See our 5-star reviews and long-standing client partnerships.
Our clients choose us for reliability, honesty, and expert forklift support.
Ready to Talk Forklifts?
Speak with our Perth team about pricing, availability, hire and finance.