Choosing Narrow Aisle Warehouse Equipment in Western Australia
Drive through Kewdale, Welshpool or the newer estates around Hazelmere and you will see the same story playing out behind the roller doors. Rents per square metre keep climbing, the building cannot get any bigger, and the only direction left for stock to go is up and closer together. So the racking gets taller, the aisles get tighter, and suddenly the forklift that served the business well for years is scraping uprights and taking three goes to line up a pallet.
Tighter aisles can genuinely add storage without adding floor area, but only if the machines working them are chosen for the job. This guide looks at the main equipment types for narrow aisle work, where each one earns its keep, and how to put together a fleet that suits a typical Perth distribution or trade warehouse.
At a glance
- Choose equipment around the main task in each aisle, not around the smallest turning circle on a spec sheet.
- Reach trucks usually handle pallet storage at height, order pickers handle case and piece picking, and pallet jacks move stock at floor level.
- A standard counterbalance forklift belongs on the dock and in the yard, not in tight racking.
- Floor condition, pallet quality, battery strategy and service support matter as much as aisle width.
Begin with the work, not the machine
There is no single narrow aisle machine that wins on every site. Before looking at brochures, break the work inside your aisles into its basic jobs. Most warehouses come down to three:
- Storing and retrieving full pallets at height. Putaway into upper beam levels and pulling reserve stock back down.
- Picking cartons or individual items. Building orders from pick faces at different levels.
- Moving pallets at ground level. Shuttling between the dock, staging lanes and floor locations.
Work out roughly how many hours a shift go to each job. The answer usually points straight to the right mix, and it stops you buying an expensive high-lift truck to do work a pallet jack could handle.
Reach trucks for pallets at height
For palletised stock in selective racking, a reach truck is normally the first machine to consider. The chassis stays compact while the mast or carriage extends forward to place or collect the load, so the truck needs far less room to turn and square up than a counterbalance forklift. Operators also get a clear view through the mast when working at upper levels.
In practice that means cleaner entries into the rack, fewer adjustments and better use of the vertical space you are paying for. Hyundai reach trucks come in stand-up and sit-down layouts, including the BR-X and BRP-9 stand-up models and the BRJ-9 sit-down range, so the cab style can be matched to how long operators stay on board.
The limitation is the floor. Reach trucks are built for smooth, level, well-kept concrete. If the same machine is expected to run outside across a broken hardstand or a gravel laydown, it is the wrong tool, and a mixed fleet will serve you better.
Order pickers when orders, not pallets, drive the day
If most of your shift is spent filling customer orders rather than moving whole pallets, an order picker will usually beat a reach truck. Parts distributors, online retailers, trade suppliers and grocery networks all fit this pattern. The operator rides the platform up to the pick face and works at a comfortable height, rather than climbing on and off a pallet machine or reaching from the floor.
Less climbing and stretching adds up to faster picks and fewer strains over a long shift. Hyundai order pickers give the operator a stable platform with smooth lift control and electric steering, in low-level and high-level versions.
Keep in mind that order pickers are specialists. A warehouse that mainly stores and moves full pallets will still need reach trucks or stackers as its core aisle machines.
Stackers and pallet jacks for lighter and floor-level work
Walking stackers make sense where loads are lighter, runs are short and the budget is tight. They suit back rooms, smaller sites and overflow storage where racking access is occasional. They take up very little room and are easy to steer in confined spaces.
Their weak point is volume. Lower travel speeds, slower lifting and operator fatigue on a busy shift all cap what a walking stacker can deliver, so on a high-throughput site it quickly becomes a bottleneck. A common arrangement is a stacker in a secondary storage area with reach trucks in the main racking and a counterbalance forklift on the dock.
Electric pallet jacks fill the gaps at floor level. They clear the dock, feed staging lanes and replenish ground-level pick faces, which frees the reach trucks to stay on putaway instead of being pulled off for short transfers. Splitting tasks this way often lifts output more than buying one bigger machine.
Why counterbalance forklifts struggle in tight racking
A counterbalance forklift carries its load out in front and offsets it with weight at the back. That design is ideal for docks, yards and general handling, but it needs much more room to turn, line up and set a load down. Squeeze one into a narrow layout and the costs show up every day: slower aisle entries, constant steering corrections and more knocks to uprights, beams and stock.
When planning a new layout, the principle is simple. Pick equipment that fits the aisle you want. Widening aisles to suit the wrong truck gives away the storage gains you were chasing in the first place. Counterbalance trucks such as the Hyundai 25B-X lithium forklift still have a big role at the loading dock and in the yard, just not between the racks.
The details that decide success
Aisle width is one measurement among several. Before choosing, check:
- Top beam height and the heaviest load at that level. Capacity falls as the mast goes higher.
- Load sizes and pallet condition. Broken or poorly wrapped pallets cause problems no machine can fix on its own.
- Floor flatness. Uneven slabs affect mast stability and how confident operators feel at height.
- Battery and charging plan. Multi-shift operations need a charging or changeover routine that keeps trucks working.
- Travel distances and congestion points. Know where trucks queue and how far they run each shift.
Electric power is the natural choice indoors because of zero exhaust emissions, low noise and fine control. Lithium-ion options make opportunity charging during breaks practical and cut routine battery maintenance, which suits two-shift operations. Our forklift buying guide covers these questions in more detail.
What this means for Perth and WA sites
Many WA warehouses run a mix of work under one roof: a busy dock receiving containers from Fremantle, reserve racking for bulk stock, and a pick zone feeding trade counters or regional freight runs to the Goldfields and the Pilbara. That variety is exactly why a single machine type rarely suffices. Give each zone a clear role and avoid buying several machines that do almost the same job, since overlap pushes utilisation down and costs up.
Summer matters too. Large metal sheds in the eastern suburbs can get very hot on 40°C afternoons, which is hard on batteries, chargers and operators alike, so charging areas need good ventilation and shade. Tight aisles with people walking nearby are an obvious collision hazard, and the WHS Act 2020 gives the business a duty to plan for it, so far as reasonably practicable.
HMH WA’s team in Bassendean can walk your site, measure aisles and beam heights, and suggest a practical mix of equipment. If demand is seasonal or you are trialling a new layout, short or long term hire lets you test before committing. Servicing and genuine parts are handled locally, which keeps downtime short when a busy aisle depends on one truck.
Related Hyundai equipment
Hyundai reach trucks
Warehouse equipment · View range
Hyundai order pickers
Warehouse equipment · View range
Hyundai pallet trucks
Warehouse equipment · Hire options
Hyundai 25B-X
2.5 tonne lithium · View model
Frequently asked questions
What is the best forklift for a narrow aisle warehouse?
It depends on the main task. For storing and retrieving full pallets in racking, a reach truck is usually the best fit. For building orders from pick faces, an order picker works better. Many sites use both, with electric pallet jacks handling floor-level moves.
Can we use our existing counterbalance forklift in narrower aisles?
It may fit on paper, but it will need more room to turn and line up, which slows every pallet and increases rack damage. Counterbalance forklifts are best kept for the dock and yard, with reach trucks or stackers inside the racking.
How do we work out which narrow aisle equipment we need?
Measure actual aisle widths, top beam heights and your heaviest loads, then look at how much of each shift goes to putaway, picking and floor-level transport. HMH WA’s Perth team can carry out a site assessment and arrange hire if you want to trial equipment first.
Talk to our Team
Sales, Hire, Servicing and Genuine Parts from Hyundai Material Handling WA.
Latest Posts
Recent Posts
Why Buy From Hyundai Material Handling WA
Buying a forklift is a long-term decision. With a local Hyundai dealer, you get sales, service, parts and hire from one Perth-based team.
Perth Based Team
Talk to people who know Western Australian sites, from our base in Bassendean.
Servicing and Repairs
Scheduled servicing and repairs by Hyundai-trained technicians.
Genuine Hyundai Parts
Genuine parts sourced through our Perth parts team.
Buy or Hire
Purchase outright or ask about short and long term hire options.
Get a Brochure and a Quote
Download a brochure, or tell us about your loads, lift heights and site and we will recommend the right Hyundai forklift. We supply businesses across Perth and regional Western Australia.
Fill out the form below, and we will contact you as soon as possible.
Contact or call us directly on (08) 9377 3321
Customer Reviews
Hundreds of Western Australian Businesses Trust Hyundai Material Handling.
See our 5-star reviews and long-standing client partnerships.
Our clients choose us for reliability, honesty, and expert forklift support.
Ready to Talk Forklifts?
Speak with our Perth team about pricing, availability, hire and finance.